WALTER ZEPF AL 200W切削液

WALTER ZEPF AL 200W切削液產品介紹

產品名稱：WALTER ZEPF AL 200W切削液  

產品包裝：200L

產品信息：用在有色金屬加工方面。WALTER ZEPF AL 200 WL潤滑油的特點是摩察系數很低，潤滑能力很強。可通過澆注，軋輥和噴淋方式進行涂層。可用堿性清潔系統很方便的從工件上去除。WALTER ZEPF AL 200 WL潤滑油對人體皮膚無害，無毒性，對生態無影響，可快速降解。

適用范圍：鋁材和有色金屬深拉，滾軋，擠壓和軋制。切削成型加工（鋸加工，車加工，銑加工和鉆加工等）鋁合金的鍛造加工。需節能的潤滑系統。

形狀：液體      

顏色：透明      

氣體：溫和    

密度：約0.91gr/cm3    

凝固點：-15℃

燃點：＞+200℃  

粘度：（+40℃）：app.100mm2/s    

毒性：LD50（Ratte oral）＞5.000mg/kg

生態：按VwVwS 1999年5月17號版本，對水源無害。

危險品等級VO:非危險品等級      

氯含量：無

品牌簡介：

Walter Zepf Schmierungstechnik——潤滑油專家

50多年來，Zepf Schmierungstechnik代表了用于日常和極端應用的可靠和高性能的潤滑劑。

同品牌型號系列如下

液壓油和齒輪油

半合成液壓油和齒輪油：

GR-32: Semi-synthetic gear oil VG 32

GR-36: Semi-synthetic gear oil VG 36

GR-46: Semi-synthetic gear oil VG 46

GR-10: Semi-synthetic gear oil VG 68

GR-100: Semi-synthetic gear oil VG 100

GR-150: Semi-synthetic gear oil VG 150

GR-220: Semi-synthetic gear oil VG 220

GR-320: Semi-synthetic gear oil VG 320

GR-460: Semi-synthetic gear oil VG 460

全合成液壓油和齒輪油

ZVG-10: Fully synthetic hydraulic oil VG 10

ZX-36-Synthex: Fully synthetic hydraulic and gear oil VG 32

ZX-10-Synthex: Fully synthetic hydraulic and gear oil VG 46

ZX-46-Synthex: Fully synthetic hydraulic and gear oil VG 46

ZX-50: Water-miscible hydraulic fluid VG 46

ZX-60-Synthex: Fully synthetic hydraulic and gear oil VG 68

ZX-100-Synthex: Fully synthetic hydraulic and gear oil VG 100

ZX-30-Synthex: Fully synthetic hydraulic and gear oil VG 100

ZX-15-Synthex: Fully synthetic hydraulic and gear oil VG 150

ZX-220-Synthex: Fully synthetic hydraulic and gear oil VG 220

ZX-320-Synthex: Fully synthetic hydraulic and gear oil VG 320

ZX-680-Synthex: Fully synthetic hydraulic and gear oil VG 680

ZX-400-Synthex: Fully synthetic hydraulic and gear oil VG 220

Z-200: Wear-protection-compound

潤滑脂Greases

水電渦輪機專用潤滑脂Water Turbine Greases

Aquagrease 240: Water turbine grease NLGI 2, biodegradable

Aquagrease 300: Water turbine grease NLGI 1, biodegradable

AR-7: Water turbine grease

Aqualub-S-III: Adhering compound for wire ropes and open gears in the area of hydraulic engineering

機械工具用潤滑脂Machine Tools Greases

AR-1 EP: Grease for highest demands NLGI 00

AR-2 MW EP: Grease for highest demands NLGI 1

AR-3: Grease for slide and rolling bearings, high rotation speeds

AR-4: Low temperature grease up to -60°C

AR-10: EP-special-grease for gears

AR-12: High temperature grease

AR-12 K: High temperature grease

AR-12-KT/VO: High temperature gear grease

AR-210: Ca-12-Hydroxistearat soap-based grease

AR-210-F: Ca-12-Hydroxistearat soap-based grease with solids

AR-280: Special grease for friction and antifriction bearings, high-temperature

AR-280-N: Special grease for friction and antifriction bearings, high-temperature with solids

AR-280/000: Special grease  for gears and friction bearings, slideways and steerings

AR-280/1-2: Grease for antifriction bearings for centralized lubrication systems and for dusty working conditions

AR-420: Special grease for wire ropes, gears, friction and antifriction bearings

FE-12 BG/MW: Fitting lubricant against fretting corrosion

Slip paste R: lubrication of prestressed seals

LS 0/1/2/3: Lithium soap greases

LS-2-F: Special Li-soap grease with solids

Supralin-ZX-400: Special grease for sliding surfaces up to -55°C and for seat adjusters

Ultra-Therm: Anti-corrosion grease

Ultra-Therm MTU: Fitting lubricant for extreme thermal strains

Ultra-Therm paste: High-temperature grease

WG-1-D: High-performance long-time grease with solids

ZX-400: Fully synthetic EP-gear grease

金屬成型潤滑劑/加工液Forming Lubricants

微量潤滑Minimal Quantity Lubrication

M-1: Forming fluid for aluminum and its alloys up to about 3mm sheet thickness, drilling, milling

M-2: Forming oil for ferrous metals, up to about 4mm sheet thickness cutting forming

M-3: Forming fluid for iron alloys, aluminum and non-ferrous metals both cutting and non-cutting

M-4: Forming oil for aluminum and non-ferrous metals, no copper corrosion

M-5: Forming fluid for drawing and pressings, drying

水溶性產品Water-Miscibles

Rayon-2: Water-miscible deep drawing concentrate

Rayon-III-K: Water-miscible drawing fluid for steel and aluminum both cutting and non-cutting, extremely low coefficient of friction

Rayon-4: Water-miscible forming concentrate for iron alloys, manufacturing rims, deep drawing of wheel disks

非水溶性產品Non-Water-Miscibles

Rayon-280: High-performance drawing oil for steel sheets up to about 10mm

Ultra-Finish Fluid: Forming oil for hardest forming operations, C-steel, stainless steels, IHV

Z-26: Forming oil for hardest forming operations,  C-steel, stainless steels, hard aluminum alloys, sawing of problematic alloys, IHV

Z-300: Forming oil for hardest forming operations without phosphating plates

ZVG-20: Forming oil for rolling high-strength iron alloys with very low coefficient of friction. E.g. production of needles and body sheets

Ultra-Finish Fluid: Special drawing oil for hardest forming operations both cutting and non-cutting, stainless steel, C-steel, IHV

ZX-Antichlor-20: Special drawing oil for forming of steel and aluminum

ZX-Antichlor-20 SD: Scrubbing oil for forming body sheets and other covering panels in the automotive industry

ZX-60-GB: Slipway oil for hardest loads, forging hammer tracks etc.

原裝進口、現貨供應、品種齊全、價格優惠、品質保障：提供原廠質保書(COA)、進口報關單、原產地證明等進口手續及品質保證文件。咨詢電話：13816815184

*

*

*

*

*

*看不清?換一張

立即提交

• 上一個：ULTRA-THERM-MONTAGEPASTE-MTU 組裝潤滑劑
• 下一個：德國Walter ZEPF AR-1 EP，AR-2，AR-4系列潤滑脂

相關產品

• 

  德國Walter ZEPF AR-1 EP潤滑脂

• 

  德國WALTER ZEPF AL 200W 切削液

• 

  ULTRA-THERM-MONTAGEPASTE-MTU 組裝潤滑劑